When the roof at 5025 Karen Drive in Marrero, Louisiana needed to be replaced, the project also had to meet IBHS FORTIFIED Roof standards through the Louisiana Fortify Homes Program. Lone Wolf Roofing installed a complete GAF Timberline HDZ Class 3 roofing system on the main house, along with a GAF Liberty SBS low-slope roofing system on an attached structure that had to be brought into the same FORTIFIED scope.
The project included a full tear-off, a 7/16-inch OSB deck overlay across the entire roof, re-nailing to FORTIFIED standards, a fully sealed roof deck, gable vent covers required by the evaluator, and a separate low-slope roofing system at the roof transition. By coordinating every component under one FORTIFIED-compliant plan, our team gave the homeowner a documented roof built for high wind exposure.







The Project at a Glance
- Project location: 5025 Karen Drive, Marrero, LA 70072
- Roof size: Approximately 2,684 square feet, or 26.8 roofing squares, on the main house
- Roof pitch: 8/12
- Roofing material: GAF Timberline HDZ Class 3 shingles
- Low-slope area: Approximately 228 square feet of attached low-slope roof, replaced with the GAF Liberty SBS self-adhering system
- System components: 7/16-inch OSB deck overlay, fully sealed roof deck, GAF starter and ridge cap shingles, drip edge, pipe flashing, gable vent covers, and ventilation modifications
- Program: Louisiana Fortify Homes Program, built to IBHS FORTIFIED Roof standards for a 140 mph design wind speed
- Additional work: Parish permitting, roof deck retrofit, gable vent protection, and coordination with the FORTIFIED evaluator
Building to FORTIFIED Standards
FORTIFIED is a building method from the Insurance Institute for Business & Home Safety (IBHS) that goes beyond standard building codes, with the goal of keeping wind and water out and keeping the roof on. A pre-site inspection of this home found roof deck gaps greater than 1/8 inch, which does not meet the FORTIFIED minimum deck requirement, along with gable vents that needed covers and an attached structure that had to be addressed as part of the roofing scope.
To meet those requirements, our crew installed a 7/16-inch deck overlay across the entire roof and re-nailed it to the rafters with 3-inch ring shank nails, marked with a chalk line and spray paint so each nail line is visibly documented. The home sits within an area with a design wind speed of 140 mph, so the roof covering, deck attachment, and edge details were all installed to the applicable FORTIFIED standard.
The FORTIFIED designation is not automatic. It depends on an independent FORTIFIED Evaluator reviewing the documented installation. Our on-site project manager captured that documentation throughout the job, including attic checks for shiners. Insurance discounts for FORTIFIED roofs vary by carrier, so homeowners should confirm details with their insurance agent.
A Complete GAF Roofing System on the Main House
A strong roof is a system, not just a shingle. For the main house, Lone Wolf Roofing installed GAF Timberline HDZ Class 3 shingles along with compatible GAF components designed to work together at the deck, edges, penetrations, and ridges, including a fully sealed roof deck membrane, new starter shingles at the eaves and rakes, new drip edge around the perimeter, and GAF ridge cap shingles at the hips and ridges.
Timberline HDZ shingles meet ASTM D3161 Class F and ASTM D7158 Class H wind ratings and pass the UL 2218 impact-resistance test. Wind, algae, and insurance-discount coverage depend on the exact products, complete system installation, and the homeowner’s carrier, so homeowners should review the applicable warranty documents for full terms.
The evaluator also required gable vent protection and modifications to the roof ventilation to bring it up to current code, which were included in the FORTIFIED scope for this home.
Addressing the Attached Low-Slope Area
During the FORTIFIED review, an existing metal-roofed addition at the home, previously treated as a patio cover, was identified as conditioned living space. Because of that, it had to be brought into the FORTIFIED roofing scope rather than left as a separate, unconditioned structure.
Lone Wolf Roofing removed the existing metal roofing on that section and installed a GAF Liberty SBS self-adhering low-slope roofing system, a peel-and-stick, torch-free modified bitumen system designed for low-slope areas like porches, carports, and roof additions. The area received its own 7/16-inch deck overlay and sealed roof deck installation, along with flashing at the transition between the low-slope Liberty system and the adjacent pitched shingle roof, so the two systems tie together correctly.
Installing a dedicated low-slope system at this transition, rather than extending the shingle roof over a slope it isn’t designed for, is what the FORTIFIED tie-in requirements called for here.
Installation Details That Matter
The roof measurement report for the main house showed approximately 160 feet 8 inches of eaves, 69 feet 4 inches of rakes, 80 feet 5 inches of ridge, 40 feet 3 inches of hips, and 40 feet 11 inches of valleys. Those measurements guided material planning for the perimeter, starter course, drip edge, and ridge cap.
Our scope included:
- Obtaining and managing the required parish permits and coordinating with the IBHS FORTIFIED evaluator
- Removing the existing shingles and hauling away all debris
- Installing a 7/16-inch OSB deck overlay across the entire roof deck to meet FORTIFIED standards
- Re-nailing the entire roof deck to the rafters with 3-inch ring shank nails, nailed every 4 inches and marked with a chalk line and spray paint to document the work
- Installing a fully sealed roof deck membrane across the main house
- Installing new drip edge around the entire perimeter
- Installing GAF starter shingles at the eaves and rakes
- Installing GAF Timberline HDZ Class 3 shingles
- Installing GAF ridge cap shingles at hips and ridges
- Replacing pipe flashing and sealing all penetrations
- Installing gable vent covers and modifying roof ventilation as required by the evaluator
- Removing the existing low-slope metal roofing and installing a complete GAF Liberty SBS system at the attached structure
- Performing final cleanup and a magnet sweep for nails
A dedicated project manager was on site to cover landscaping and contents, monitor safety, check the attic throughout the day, document the installation for FORTIFIED review, communicate with the homeowner, and confirm the jobsite was left cleaner than we found it.
Why Homeowners Choose Lone Wolf Roofing
At Lone Wolf Roofing, we approach every roofing project with a focus on protecting the home, communicating clearly, and paying close attention to the installation details that affect performance over time. From deck retrofits to low-slope tie-ins, our team works to create a smoother, more accountable experience.
Lone Wolf Roofing is a 2026 GAF Master Elite Roofing Contractor. We are also licensed for residential construction in Louisiana. Our project documents include a five-year workmanship warranty for fully replaced portions of the work, subject to the agreement’s stated terms and exclusions. Manufacturer warranties apply separately to qualifying roofing products.
Thinking About a FORTIFIED Roof in Marrero?
If your home has an attached porch, carport, or low-slope addition, or you simply want to know whether your roof deck and framing meet FORTIFIED minimum requirements, Lone Wolf Roofing can walk you through the process, from the pre-site inspection to documentation and evaluation.
Contact Lone Wolf Roofing today to schedule a roof inspection in Marrero, Louisiana, or a nearby Jefferson Parish community.